Programming Mode; Advanced Settings - L'OR SUPREME Manual De Instrucciones

Wait until the rinsing process is completed.
6 . PROG R AM MING MODE
In the programming mode you can change stand-by timings, advanced settings (drink- and
machine settings), and manually start the cleaning or descaling programs.
Click on the programming mode icon ( )
To start Cleaning or Descaling:
Select the desired program and enter the
password. (3112)

6.1 Advanced settings

To enter the advanced settings a password
must be entered. (1402)
Remove the 1L container from the fridge, and
place the milk pack in the fridge. Put the tube
in the milk pack.
This concludes the descaling program.
You will see all the menu items in the display.
Click the desired item.
Press start to commence the selected
program.
The time required is shown in the display.
You will see all the menu items in the display.
Click the desired item.
If there is not enough water in the water tank
during the descaling process, a display message
will prompt you to refill the water tank.
When done, the machine will continue
descaling.
Stand-by time can be set between 0 (never) to
5 hours in steps of 0.5 hour.
Drink settings (coffee drinks)
Press a drink selection button to change
coffee volume and temperature.
L'OR Suprême |
EN
13