Specifications - Lippert GS-STAR-200W Manual Del Usuario

SPECIFICATIONS

This solar modules are made of monocrystalline solar cells in series with high
efficiency, high transmission rate, low iron tempered glass, anti-aging EVA, high flame
resistant TPT laminate, and anodized aluminum alloy frames. They are designed for
easy installation, extended longevity, and resistance to damage incurred by high wind
or hail.
Output cable
Connectors
Junction box
Bypass diode
Construction
Frame
Dimension (W x H x D)
Weight
Solar cell
Max Power (Pmax)
Operating Voltage (Vmp)
Operating Current (Imp)
Open-Circuit Voltage (Voc)
Short-Circuit Current (Isc)
Output Tolerance
Max Series Fuse Rating
Module Efficiency
Temperature Coefficient of Voc
Temperature Coefficient of Isc
Temperature Coefficient of Pmax -0.41%/°C
Operating Temperature
NOTE: All technical data at standard test condition (E=1000W/m² TC=25°C AM=1.5)
CCD-0005517
Specifications
14 AWG PV Cable
MC4 compatible connectors
IP65 Rated
Schottky barrier rectifiers diode
Front: high transmission rate and low iron tempered glass 1/8" (3.2mm)
Back: TPT
Encapsulation material: EVA
Silver anodized aluminum
271/2 x 613/8 x 13/8" (715 x 1560 x 35mm)
26.5lbs (12kg)
36 pieces monocrystalline silicon solar cell
200W
20.31V
9.85A
24.35V
10.33A
0% to +5%
20A
17.9%
-0.30%/°C
+0.06%/°C
-40°F to +185°F (-40°C to +85°C)
- 10 -
Rev: 03-10-22