Door Alignment - Commercial Cool CCRR4ALB Manual Del Usuario

SET UP & USE
PROTECTION FROM HEAT AND MOISTURE
• Do not install your refrigerator in any location where heavy moisture is present
or if the location is not properly insulated. This refrigerator is not designed to
operate in temperature settings below 50° Fahrenheit.
• Location for the refrigerator should be on a hard surface and away from direct
sunlight and heat source, e.g., radiators, baseboard heaters, cooking appliances,
etc.

DOOR ALIGNMENT

1. Remove any loose items in the refrigerator and carefully place it on its back.
2. Use a Phillips-head screwdriver to unscrew the 4 screws from the bottom hinge
bracket.
3. Adjust the door so it is aligned and partially secure. Make sure the door and
cabinet are properly aligned and then secure tightly.
4. Place the unit back in an upright position.
Page 7