sauermann HQ 210 Guia De Inicio Rapido página 3

2 Connections
3
1
1
3 Set language
OK
4 Use of the probes
Connect a probe
Connect the mini-DIN cable on the mini-DIN connection of the probe.
Connect the mini-DIN cable with the probe on the instrument.
A beep indicates that the operation has been correctly performed.
Special precautions for air velocity probes
1
2
1. Module
4 2. Location to remove the module
1
3. Battery
4. Probe handle
1. Mini-DIN C2 connection
2
2. Mini-DIN C1 connection
1. USB connection + power supply
2. Light indicator for battery charging
2
Press Up and Down
arrows to select the
required language:
FRA, ENG
Before any use of the device
with an air velocity probe,
please lower the protective
tube (1) of the sensitive
element (except vane probe).
Always use the standard air
velocity probe with the red
point in front of the flow.
Always use the telescopic
probe with the white point in
front of the flow.
OK