Package Contents - Corsair EX100U Manual De Instrucciones

PACKAGE CONTENTS

A CONNECTOR CAP
B USB TYPE-C CONNECTOR
CONNECTING AND DISCONNECTING THE EX100U TO YOUR COMPUTER
1. Your storage device comes with 2 cables.
> Use the USB-C to USB-C cable to connect to USB-C or Thunderbolt 3 and 4 hosts.
This connection type is required to achieve the optimum performance.
> Use the USB-C to USB-A cable to connect to a host with USB-A connector.
2. Always use the "Eject/Safely remove/Unmount" function in the operating system before disconnecting the drive.
GETTING THE EX100U READY FOR USE
The drive ships ready to use formatted with exFAT, a partition format that works on a variety of operating systems.
Should you want to format the drive in another format, please use standard tools from your disk management or
utility suite.
OPTIMIZING PERFORMANCE
The drive will perform at its highest speeds when connected to a USB 3.2 Gen 2x2 (20Gb) port. It is compatible
with USB 3.2, 3.0 and 2.0, but may not reach its maximum performance due to the lower bandwidth provided by
these ports.
INSTALLING THE SSD TOOLBOX
Please download the CORSAIR SSD Toolbox to obtain extended drive information and check for Firmware updates.
Not all functions of the SSD toolbox are available for External Storage. CORSAIR SSD Toolbox is available for
Windows systems.
DOWNLOAD LINK: www.corsair.com/downloads
ENGLISH
B
C USB-C TO USB-C CABLE
D USB-C TO USB-A CABLE
1
C D
A