Function Introduction - Xplova Lightning 5 Manual Del Usuario

How to use the APP on your mobile phone

6. Function Introduction

Switch to Set parameters
Switch on/off Electric lock
(After switching to on, the
scooter will be self-locking when
the front wheel rotates less than
one circle and then stops)
Switch on/off The headlights
Show Driving distance
Show Current distance
7. Set parameters Screen
Back to the main
Show Bluetooth Equipment list
screen
Power on/off the scooter
Show Remaining power
Show the speed
Cruise control (When it is on, press and hold the
accelerator for 5-8 seconds and release it after a
beep is heard, and the scooter will move forward
at the highest speed in the current speed mode)
Switch on/off Lateral illumination (only works in
Speed mode 2 and 3)
Switch Speed mode (the level of the green
light bar indicates the corresponding speed)
Speed mode 1 Speed mode 2 Speed mode 3
Show Total distance
EN-4
Switch for The headlights
Switch for Cruise control
Searching alarm on/off
Switch between km/h and
mph
Setting for Automatic
showdown time
Switch between Language