DeLOCK 42600 Manual Del Usuario página 3

English
Package content
• External enclosure M.2
• Screwdriver
• Mounting material
• Cable USB-C™ male to USB-C™ male, length ca. 30 cm
• 1 x thermal pad
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Avoid anti-static electricity when installing the SSD
Hardware Installation
1.
Open the housing.
2. Now you plug your M.2 SSD into the slot.
3. Fix the module with the help of the screws.
4.
Close the enclosure.
5.
Connect the USB cable with the enclosure and a free USB port
of your computer.
Driver Installation
1.
Switch on your computer.
2. The external drive will be recognized and you can start using
the device immediately.
Attention
There is no support for M.2 AHCI SSDs.
If using more than one ASMedia chipset in your system, it may
result in the maximum data transfer rate not being reached.
-3-