Descargar Imprimir esta página

Hama 00053118 Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
6. Select "No, not this time", and then click "Next".
7. Select "Install the software automatically
(recommended)" and continue with "Next".
8. To complete the installation, click "Finish".
4. Confi guration
By default, the USB GPS receiver using the following
settings:
COM port: COM3
Transfer speed: 9600 baud/s
In order for the navigation program to be able to
communicate with the GPS receiver, the respective COM
port and the transfer speed must be set in the navigation
software. For further information on this, refer to the
navigation software manual.
If your navigation program does not support the COM
port used by default, you can manually change the COM
port.
Proceed as follows:
1. Open the "Device Manager".
2. Select "Prolifi c USB-to-Serial Comm Port (COM3)"
under Ports (COM and LPT), and open the device
properties by double-clicking.
6
3. Select the tab "Port Settings".
4. Click "Advanced...".
5. By clicking the selection fi eld next to "COM Port
Number:", you can select the appropriate COM port.
Click OK to confi rm your selection.

Publicidad

loading