DeLOCK 64183 Manual Del Usuario página 2

English
Description
This docking station by Delock enables an external connection of up to two 2.5"
or 3.5" SATA HDDs or SSDs through the USB interface. This solution does not
require an external enclosure since the drive can be plugged into the docking
station directly. Furthermore the clone function enables to copy the content of one
HDD to another without using a PC.
Specification
• Connectors:
1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-B female
2 x SATA 6 Gb/s 22 pin receptacle
1 x SD slot
1 x Compact Flash slot
1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A female
1 x DC jack
• Chipset: VIA VL813, JMicron JMS561U
• Function key:
1 x Clone button
1 x On / Off switch
• For 2.5" and 3.5" SATA HDD / SSD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• It can only be used one memory card, not both at the same time
• Data transfer rate up to 5 Gbps
• LED indicator for power, access and copy status
• Dimensions (LxWxH): ca. 153 x 110 x 62 mm
• Plug & Play
Power supply specification
• Wall power supply
• Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
• Output: 12.0 V / 3.0 A
• Ground outside, plus inside
• Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm
-2-