DATATEC FLIR ONE Serie Guía Rápida página 7

2 EN-US English
6. Extending arm
2.8 Quick start guide
1. Install the FLIR ONE app from your preferred app store.
2. Attach the FLIR ONE camera to the back of your mobile device by pulling out
the extending arm until the camera is clamped around the device. As an al-
ternative, place the FLIR ONE camera close to your mobile device.
3. To turn on the FLIR ONE camera, press and hold the On/Off button until the
LEDs start flashing, indicating that the camera is booting up. It takes about
20 seconds for the camera to start.
4. Start the FLIR ONE app on your mobile device.
5. The FLIR ONE app will guide you to setup permissions for the app and to
connect the camera with the mobile device.
6. To turn off the FLIR ONE camera, press and hold the On/Off button until the
LEDs turn off.
#T810602; r. AA/86878/86878; mul 4