DO941T
reheat button. Place the bread that you want to reheat into the slot. Press down
the breadlift and then press the reheat button. The button will light up. The reheat
button will light up. The bread will again pop up automatically. Changes in the
browning control will not alter the reheating time.
CLEANING OF THE TOASTER AND THE CRUMB TRAY
Remove the plug from the outlet before cleaning the appliance.
•
Whipe the outside of the toaster with a damp cloth and dry thoroughly. Do not use
any abrasive cleaners.
•
Do not use a fork or any sharp, metal objects to clean the inside of the toaster.
This may damage the heating elements.
•
Before cleaning the crumb tray, remove the plug from the socket and wait for the
toaster to cool down. Then open the crumb tray by pressing the tray and pulling
it out of the toaster. Clean the crumb tray with a damp cloth. Always dry the tray
thoroughly before replacing it into the toaster. When replacing the crumb tray,
make sure that you push it far enough into the toaster, so that it clicks into place
when you release it.
28