essentiel b KARAMIC Instrucciones De Uso página 24

Listening to music in wired mode
1. Press and hold the button
2. Make sure the Bluetooth* connection is disconnected.
3. There are two ways to connect the microphone to an audio device via a cable.
i. Plug the micro USB plug into the micro USB port on the microphone and plug
the 3.5 mm audio cable into an audio device. A sound prompt plays to confirm
the connection.
ii. Plug a 3.5 mm audio cable into your audio device's output jack. Plug the
other end of the cable into the AUX port on the microphone. The microphone
automatically switches to AUX mode. (The echo and vocal cut functions on the
microphone are not available in AUX mode.)
4. Open a karaoke app to play music, sing and record, or play music on your audio
device to singalong to.
5. To control playback functions (play, pause, next/previous song) use the controls on
your audio device.
6. Adjust the volume of the voice and music (
switch up or down.
Press and hold the button EFFECT to change the vocal effect. Press and hold again
7.
to turn off the vocal effect. A sound prompt plays to confirm when the function is
turned on or off.
8. Press the button
Playing content from a TF/micro SD card
1. Press and hold the button
2. Insert the TF / micro SD card into the TF / micro SD port. A sound prompt plays to
confirm the connection and the TF/micro SD card music will start to play.
See points 5-11 in the "Listening to music wirelessly" for how to playback music
3.
and use the microphone's controls.
24
to turn the microphone on.
to turn off the sound.
to turn the microphone on.
- ) by sliding the relevant microphone