Beper 70.411 Manual De Instrucciones página 8

Essential oil diffuser Use instructions
PRODUCT DESCRIPTION
01. Vent Hole
02. Internal vapour diffusion cone
03. Water Tank
04. Max. Water Level Line
05. Vapour diffusion button
06. LED light button
07. Low, medium, high speed indicator
08. DC Jack
09. 18V Switching Adaptor
OPERATION
IMPORTANT NOTES BEFORE USE:
Only use the product as described in this manual.
Before plugging in, ensure that voltage is correct.
The product must be positioned on a flat, stable surface. To avoid risk of electric shock, short circuit
and ire, do not use the appliance.
if the power cord is damaged or if the electrical socket has worked loose.
Do not use detergents, solvents or aggressive agents to clean the product.
Do not use corrosive fragrances such as citrus fruits, citronella or lemon as these may permanently
damage Ohe product.
Only use clean water at room temperature to fill the tank. as these may permanently damage the
product. Always unplug before maintaining or cleaning the appliance.
Never touch the plug or diffuser with wet hands.
Do not use the appliance outdoors. Do not immerse in water or other liquids. Keep away from show-
ers, baths or similar places. To disconnect the appliance, press the button until it turns off and unplug
grasping the plug and not the cord. Do not use extensions.
1. Remove the external and internal diffusion cones
2. Fill the water tank with clean water (not exceed max water level)
3. Add 3-5 drops of your favorite essential oil into the water
4. Replace the diffusion cones
5. Plug the adaptor
6. Press MIST button to switch diffusion on
7. Press LIGHT to switch LED light on
Note: Do not tilt the essential oil diffuser nor attempt to empty or fill it when it is operating .
8