Battery Indicators; Battery Status - Leap Frog LF2423 Manual De Instrucciones

1. Connect the Baby Monitor
Notes:
• The rechargeable battery in Parent Viewer is built-in.
• Use only the power adapters supplied with this product.
• If your Baby Monitor is connected to a switch controlled socket, make sure it
is switched on.
• Connect the power adapters in a vertical or floor mount position only.
• Make sure the Parent Viewer, the Baby Units and the power adapter cords are
out of reach of children.
2. Charge the Baby Monitor
When you connect and power on Parent Viewer, its battery will
charge automatically.
The battery icon on the viewer indicates the battery status:

Battery Indicators

The screen
displays . The
light flashes.
The battery icon
becomes solid
Notes:
• Before using the baby monitor for the first time, charge the Parent Viewer and
Baby Unit batteries for 12 hours.
• To shorten battery charging time, turn the units off while charging.
• The standby time varies depending on the sensitivity level you set, your actual
usage, and the age of the batteries.

Battery Status

The battery is low in
power and may only
be used for a short
time.
The battery is fully
charged.
.
4
Action
Charge without
interruption
(about 30
minutes).
To keep the
battery charged,
connect it to AC
power when not
in use.