Hardware Contents; Safety Information - Harbor Breeze WL131MBK Manual Del Usuario

HARDWARE CONTENTS (shown actual size)
Mounting

SAFETY INFORMATION

READ AND SAVE THESE INSTRUCTIONS.
DANGER
• For your protection and safety, carefully read and understand the information provided
completely before attempting to assemble, install or operate this product. Failure to do so could lead to
fire, electrical shock or other injuries that could be hazardous or even fatal.
• If using these light fixtures in a WET location, these light fixtures must be connected to a supply circuit
that is protected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury,
electrical shock or death.
• DO NOT connect this fixture to an electrical system that does not provide a means for equipment
grounding. Never use a fixture in a two-wire system that is not grounded. Installing a fixture into an
electrical system not having a proper grounding means could cause metal parts of the fixture to carry
electrical currents if any of the fixture wires, wire connections or splices were to become broken, cut or
loose during the mounting or normal operation of the fixture. Under this condition, anyone coming in
contact with the fixture would be subject to electrical shock, which could cause serious injury or death.
AA
Plate
Qty. 1
BB
Wire
Connector
Qty. 3
DD
Decorative
Nut
Qty. 2
3
CC
Fixture
Screw
Qty. 2
EE
Nut
(preassembled)
Qty. 2
in this manual