Meccanica Fadini SICU 18 Manual De Instrucciones página 2

SICU 18
INOX - fixed
FITTING OPERATIONS
Drill four holes in the pavement to match the distance and pitch of the holes in the
fixing base plate; as next step, fit SLM fischer type expanding steel inserts flush with
pavement finish level.
Fit the four M16 stainless steel threaded bolts to the four
fixing steel inserts and screw them to jut out 35 to 40 mm;
tighten the M16 stainless steel nut so that the bolt can fit
the insert very firmly jutting out approx. 45 mm max.
from pavement level.
Unscrew and remove the stainless steel M16 nut.
Do the same operations with all four stainless steel bolts.
Position the fixing block, armoured core with base plate, on to the four
stainless steel bolts; fasten it by tightening the four M16 stainless steel
nuts very hard.
OVERALL DIMENSIONS
3849
GB
Drwg. No.
Ø 314
120x120
Ø 314
INSTRUCTIONS SICU 18
Mount the stainless steel
square section post on to the
fixing block by means of the
useful handling ring fitted to
it; eventually tighten the four
stainless steel M16 blind nuts.
Post finish
Total weight
Impact resistance
[A]
Breakout resistance
[A]
[A] Various factors, such as the compaction index, soil permeability coefficient and kind of
concrete may reduce the values indicated even significantly.
Stainless steel
handling ring
Stainless steel
square post
Stainless steel
M16 blind nuts
Stainless steel
base flange
Stainless steel
M16 nuts
Steel armoured
fixing block
Steel fixing
base plate
Stainless steel
threaded M16 bolts
SLM fischer type
steel inserts for
ground fixing
AISI 304 SS steel brushed
31 kg
20.000 J
250.000 J