Toshiba Carrier RBC-AMS54E-UL Manual Del Propietário página 23

While setting the functions
When the central control is used (when the run and stop operation is prohibited)
• The Schedule timer cannot be set on the Follower remote control when the dual remote control system is used.
• Adjust the clock before setting the Schedule timer. (page 34)
• The time can be adjusted by the minute.
• The temperature can be set within the range from 64°F to 84°F. (The limited temperature range is applied if the Set
temp. range limit function is activated.)
• The operation mode for the Schedule timer is the mode selected last time when the air conditioning unit was used.
• When dual automatic mode is used, "--", "ON", "OFF", and "Auto" can be selected for the operation mode.
If dual automatic mode is selected in the schedule timer settings, select "Auto".
If "ON" is selected and operation is started in automatic operation mode, the cooling temperature set point and
heating temperature set point will be set automatically.
• The operation mode can be selected. For details, refer to "6. Setting timer operation mode" of "Field setting menu" in
the Installation Manual.
 Condition setting
* Up to 8 different running patterns per day can be programmed.
Schedule timer
1.Schedule timer
ON / OFF
2.Condition setting
1 / 2/ 3
3.Holiday setting
Return Fix
Schedule timer1 (1/3)
Day : Monday
1. -- --:--
2. -- --:--
3. -- --:--
4. -- --:--
Return Set
Day Next
(1)
Schedule timer1 (1/3)
Day : Monday
1. -- --:--
2. -- --:--
3. -- --:--
4. -- --:--
Return Fix
--°F
--°F
--°F
--°F
--°F
--°F
--°F
--°F
Reset
1
Push the [
"2. Condition setting" on the "Schedule
timer" screen.
2
Push the"
"
○
one of 1/2/3, then push the [
button.
Push the "
confirm the settings for each day.
Push the "
the current settings. 8 different settings
appears.
Push the [
"Schedule timer" screen.
3
Push the [
4
Push the [
the day to set, then push the "
[ F1] button.
Push the [
"Unconfirmed check" screen.
5
Push the [
"--", "ON", "OFF", "Auto*".
Select "ON" to change the operation start time
and the set temperature settings.
Select "OFF" to change the operation stop time
setting.
"--" indicates that the item has not been set.
6
Push "
or temperature.
When "--" is displayed, time or temperature
cannot be selected for that item.
7
Push the [
time or temperature.
– 22 –
Owner's Manual
∧ ∨
] / [ ] button to select
← " [ F1]/

→" [ F2] button to select

MENU]
Day" [ F1] button to
Day
Next" [ F2] to confirm
Next
CANCEL] button to return to the
MENU] button.
∧ ∨
] / [ ] button to select
CANCEL] button to switch to the
∧ ∨
] / [ ] button to select
→ " [ F2] to select time
∧ ∨
] / [ ] button to set
↓"
EN