Hardware Installation - Grandstream GSC3516 Guía De Instalación Rápida

GSC3 5 1 6 PORT S
Port Label Description
Factory reset button.
Press for 10 seconds to reset factory default
Reset
settings.
Ethernet RJ45 port (10/100Mbps) supporting
NET/PoE
PoE/PoE+.
2-Pin port 2-pin multi-purpose input port.
H ARDWARE I N STALLAT I ON
GSC3516 can be mounted on the wall or ceiling. Please refer to the following
steps for the appropriate installation.
Wa ll M ount
1. Locate the equipment holder on the desired po-
sition with arrow up. Drill three holes on the wall
referring to the positions of holes on the metal
bracket.
2. Fix the metal bracket on the wall by expansion
screws.
3. Align the position line on device's back cover
with the positioning slot.
4. Rotate the device clockwise untill it is locked on
the right postion.
4
Lock
Positionining slot
3
~3~
Ce iling M ount
1. Put the ceiling mounting (metal bracket)
in the ceiling's center and mark the posi-
tion of the three screw holes.
2. Drill a round hole with a diameter of
18mm for Ethernet cable. The distance
between its center and the highlighted
hole on the plastic bracket should be
35mm.
3. Fix the plastic and metal brackets on the
ceiling with flat-head screws and lock-
nuts.Then place an Ethernet cable pass
through the 18mm-round hole.
4. Align the position line on device's back
cover with the positioning slot.
5. Rotate the device clockwise until it is
locked on the right postion.
5
1
Ant i-t he ft I nst a llat ion
After the device is assembled with the metal bracket support on the wall or ceiling,
use the anti-detachable screw (M3 x 50) in order to prevent theft.
2
Metal
bracket
1, 2
35mm
Hang rope
plate
M3 nut
Plastic
bracket
Metal
bracket
3
Positionining
slot
4
1x Screw
(M3 x 50)
~4~
M3x50
screw
Lock