Installation And Mounting - Code 3 Citadel Serie Instrucciones De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Unpacking and Pre-Installation:
Carefully remove the product and place it on a flat surface. Examine the unit for transit damage and locate all parts. If damage is found or
parts are missing, contact the transit company or Code 3. Do not use damaged or broken parts.
Ensure the product voltage is compatible with the planned installation.

Installation and Mounting:

CAUTION!
When drilling into any vehicle surface, make sure that the
area is free from any electrical wires, fuel lines, vehicle
upholstery, etc. that could be damaged.
Refer to vehicle specific installation for mounting instructions.
Control box recommended mounting hardware: #8-#10.
Max mounting torque 35in-lbs using #10-32 with flange nut or washer
on flat surface. Different mounting hardware or surface will affect max
torque limits
6.11 155.1
Ø 0.19 4.9
1.20 30.5
3.21 81.5
0.30 7.6
2.70 68.6
Figure 1
5.65 143.5
Page 2 of 6

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Matrix

Tabla de contenido