Troubleshooting - djive Vacumate Ultralight DJ50012 Manual Del Usuario

TROUBLESHOOTING \\\

ATTENTION –
from moving parts, turn off the vacuum and unplug the charger
before servicing or cleaning. Additionally, do not handle plug or
appliance with wet hands.
Problem
Vacuum will not operate
Vacuum will not charge
Vacuum does not
clean properly
Dirt is leaking from
the vacuum
Unable to install the dust bin
16
To reduce the risk of electrical shock or injury
• Charge the battery completely before use
• If the charging indicator light is blinking green,
return the vacuum to the charger for 30 se-
conds
• Ensure that the dust bin is returned to the un-
extended position so the connection points are
aligned with the charging station
• Ensure that the electrical plug is connected
• Empty and clean the dust bin
• Replace the filters
• Ensure that the dust bin is installed correctly
• Empty and clean the dust bin
• Ensure that the filters are installed correctly
• Replace the filters
• Ensure that the filter is installed correctly
and the cartridge is slotted into the dust bin
Possible cause and solution