How To Use - Duronic TB10 Instrucciones De Uso

1. Position the toaster on a kitchen worktop towards the rear of the surface
ensuring that nothing is above it.
2. Unwind the Power Cable(11) to the required length and plug it in.
3. Use the Toasting Level Dial(6) to set your level of preference between 1 and
6. For a medium golden brown colour, select level 3-4.
4. Place the food to be toasted into the Toasting Slot(1).
5. Press down the Lever(2) until it locks in place. The Cancel Button(5) will
illuminate.
6. Toasting ends when the food being toasted is pop up. The LED on the Cancel
Button will go off.
7. Your toasted food will pop up automatically. To raise it higher simply lift the
lever.
Note:
• Toasting can be interrupted at any time by pressing the Cancel Button.
• The Lever will not stay down unless the toaster is plugged in.
Tips
• If you are going to toast only one slice of bread, set the toasting level lower
than you would normally use for two slices.
• The lever can be lifted manually after popping up so that smaller items can be
easily removed from the Toasting Slot.
Reheating Cold Bread or Toast
If you have toast that has popped up already but since gone cold, you can pop it
back in the toaster to be reheated.
1. Press the Lever down until it locks in place. The Cancel button will illuminate.
2. Press the Reheat Button(3). The Reheat button will illuminate.

How to Use

10