2. USAGE INSTRUCTIONS
2.1 Unfolding Instructions
When you receive the scooter for the first time it will be folded. To unfold follow these
simple instructions
1. Press down on the clasp with your finger and the main shaft will be unlocked and you will
be able to pull it up so it is vertical. The handlebars should click into place when raised fully.
2. Push the clasp in to lock the main shaft in its vertical position
3. To fold down the scooter repeat the steps above and push the handlebar back down until
it is horizontal on the base of the scooter.
2.2 Extending/Shortening Handlebars
If you need to change the height of the handle
bars, you can adjust it to one of 4 preset heights.
1. Loosen the handlebar lock by rotating the lock
(a) anti-clockwise.
2. Press and hold the metal snap button (b) to
release the handlebars and allow it to be raised or
lowered.
3. Adjust to the desired size. (c) Make sure the
metal snap button is fully extended from the
corresponding hole for the height required before
use.
4. Tighten the handlebar lock (a) by rotating
clockwise.
Repeat the steps above to lower the handlebars
when storing the scooter.
a.
b.
c.
5