SBS TABOOKPRO11KBOARD Manual De Instrucciones página 4

UK
USER MANUAL
Bluetooth link operation steps
1 - After turning the power switch to the ON position, the battery
indicator light will be on for 3 seconds
2 - Unlock the iPad and tap "Settings".
3 - In the settings menu, tap "Bluetooth"
4 - Press the "C key (connect)" + Fn key for 2 seconds, the
Bluetooth light flashes to start pairing.
5 - Discover the Bluetooth keyboard device: Keyboard and click,
it will connect automatically.
6 - After the blue night connection is successful, the pairing
indicator will be off, and the device will be displayed as "connected"
in the Bluetooth device list.
Note
1 - If the keyboard case has no function after the connection is
successful, please follow the steps below to set your iPad:
Open Settings - General - Keyboard - Physical Keyboard - Turn Caps
- Lock Keys to switch languages.
2 - Introduction of three backlight modes:
monochrome backlight;
breathing light;
the backlight is turned off;
4
On/off and bluetooth link indicator light: After turning
on the power, the switch will be on for 3 seconds.
Low battery indicator: flashes when the battery is too
low to prompt for charging.
Charging indicator: long on when charging, and goes
off when charging is complete.
Upper and lower case status indicator: the light is on
when the keyboard is in the upper case input state
Flashes after entering the Bluetooth pairing mode,
and turns off when the Bluetooth link is successful
Type-C charging port
Switch