Technical Data - NORAUTO HP100 Manual De Instrucciones

EN
The power washer turns on for 2
seconds, shuts off, and will not turn
back on. Do I have a defective unit?

TECHNICAL DATA

ART: 2199587 / NO4086
Max.pressure
Water flow (max)
Voltage
Frequency
Power consumption
Type of protection
35
N o . I t s o u n d s l i k e y o u r p o w e r w a s h e r i s w o r k i n g j u s t f i n e . W h e n t h e
w a t e r i s c o n n e c t e d , t h e a c c e s s o r i e s a r e a s s e m b l e d p r o p e r l y , a n d
t h e p o w e r s w i t c h i s t u r n e d o n , t h e p o w e r w a s h e r w i l l t u r n o n f o r
1 - 2 seconds to prime the pump. It automatically shuts off and waits for the spray gun trigger to
be squeezed. When the trigger is squeezed, water starts flowing through the pump. The water
sensor in the pump "senses" the moving water and automatically turns the power washer on.
Or, turn the power switch to off, hold in the trigger on the spray gun, so that you have a steady
stream of water. While you are holding the trigger open on the spray gun, at the same time, turn
the power switch on.
PWC001-S Length
10MP Width
450 l/h Height
220-240V Water inlet temperature (max)
Sound level according to EN 60704-1 and ISO
50 Hz
3744
1.3 kW Water jet force (max)
IPX5 Vibration level according to ISO 5349-1
~ 306 mm
~ 180mm
~ 222mm
40 °C
95dB (A)
20 N
2
<2,5 m/s