Circular Saw; Technical Specifications - Power Craft 88601 Manual De Uso

CIRCULAR SAW

Introduction
To get the most out of your new circular
saw, please read through these instructions
and the enclosed safety instructions before
use.
We also recommend that you save the
instructions in case you need to refer to
them at a later date.
GB
Technical specifi cations
Voltage/frequency:
Power rating:
Speed:
Cutting capacity at 90°:
Cutting capacity at 45°:
Cutting blade
Hole diameter:
Softgrip handle
Steel baseplate
26
230 V ~ 50 Hz
1,400 W
4,500 rpm
64 mm
40 mm
Ø 185 mm, 18 teeth
20 mm
Power rating
Indicates the machine's maximum
power.
Voltage/frequency
Indicates the required voltage and
frequency of the power supply to
which the machine is connected.
Speed
Indicates the machine's speed(s)
or speed range in revolutions per
minute.
Blade size
Gives the diameter of the blade.
Cutting angle
Indicates the machine's bevel and
mitre range.
Softgrip
Indicates that the machine's
handle has a softgrip coating.
Hearing protection must be used!
Use hearing protection when
operating the machine!
Transport case
Indicates that the machine is
supplied in a transport case.
Instruction manual
Read the instructions manual
carefully before use, and keep it for
future reference.