Setting The Temperature - Teknofun 811 327 Guia Del Usuario

Setting the time :
Press the SET key to enter the time and date settings. Press the UP and C/F (DOWN) keys to set the hour, minute, year, month, day, in order,
respectively.
Once the date is set, the day of the week (Monday to Sunday) is automatically changed accordingly.
Press the MODE button to exit the time setting, or it will automatically exit the time setting after one minute without pressing any button.
Alarm mode and snooze mode :
Press the MODE button to enter the alarm mode:
Setting the alarm :
Press the SET key to enter the alarm and snooze settings, and set the hour, minute and snooze respectively in sequence by pressing the UP and
C/F (DOWN) keys.
Press the MODE key to exit the alarm setting, or it will automatically exit the alarm setting after one minute without pressing any key.
To activate the alarm and snooze function, press the UP or C/F (DOWN) key to activate, the alarm logos will be displayed when activated.
When the alarm clock reaches the set time, it will sound for 1 minute and the indicator will flash. When the snooze time is reached, the alarm
will sound twice, it will sound every minute until the alarm is turned off by pressing the SET key or any key to pause.
Setting the snooze interval time: 1~60 minutes (default 60 minutes)
When the alarm and snooze logos do not appear on the display, it means that the alarm and snooze are disabled. If only the alarm sign lights
up, there is no snooze function. To have the snooze function, the alarm and snooze logos must be on at the same time.
12/24 mode conversion :
Press the 12/24 button to change from 12-hour to 24-hour mode.

Setting the temperature :

It can cover the Celsius/Fahrenheit display by pressing the DOWN, C/F button, the normal measurement range is 0°C-50°C (32°F-122°F), and
the accuracy can be up to 0.5°C.
Adjusting the backlight brightness :
Press the backlight adjustment button (which is located below the display screen) to adjust the backlight brightness, high (100%) - medium
(50%) and low 10%. You can simply press the figure to activate the backlight adjustment button.
LED lighting function:
To turn on the LEDs press the LED button.
WARRANTY
This product is covered by our warranty of two years. For implementation of the warranty or after sales service, you should contact your dealer with your proof
of purchase. Our warranty covers defects in materials or assembly due to manufacturer with the exception of any damage from non-compliance with instructions
for use tampering with the product (such as dismantling, exposure to heat or humidity).
Note : please keep this manual, it contains important information.
Teknofun states that the alarm clock complies with the essential requirements and other relevant provisions of directive 2014/53/UE. The declaration of
conformity can be requested at hotline@teknofun-entertainment.eu or 15 rue beaujon 75008 PARIS France
Made in PRC
© 2022 Teknofun All Rights reserved
© 2022 Madcow Entertainment France All Rights reserved