Symbol Meaning; Warning Labels; Personal Safety - DeWalt DCLE34021 Manual De Instrucciones

Ocultar thumbs Ver también para DCLE34021:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

than those specified herein may result in hazardous
radiation exposure.

CAUTION: Keep fingers clear of the back plate and
stud when mounting with magnets. Fingers may
become pinched.

CAUTION: Do not stand underneath the laser when it
is mounted with the magnet bracket. Serious personal
injury or damage to the laser may result if the laser falls.
The label on your laser may include the following symbols.
symbol
Meaning
V
Volts
mW
Milliwatts
Laser Warning
nm
Wavelength in nanometers
2
Class 2 Laser

Warning Labels

For your convenience and safety, the following labels are on
your laser.
WARNING: To reduce the risk of injury, user must
read instruction manual.
WARNING: LASER RADIATION. DO NOT STARE INTO
BEAM. Class 2 Laser Product.
WARNING: Keep clear of magnet. Magnet hazard
can disturb pacemaker operation and result in
serious injury or death.
If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired.
Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. This tool may create sparks which may ignite the
dust or fumes.
Store an idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands of
untrained users.
Tool service MUST be performed by qualified repair
personnel. Service or maintenance performed by
unqualified personnel may result in injury. To locate your
WALT service center go to www.D
nearest D
e
Do not use optical tools such as a telescope or transit
to view the laser beam. Serious eye injury could result.
Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into
the laser beam. Serious eye injury could result.
Do not position the laser near a reflective
surface which may reflect the laser beam toward
anyone's eyes. Serious eye injury could result.
Turn the laser off when it is not in use. Leaving the laser
on increases the risk of staring into the laser beam.
Do not modify the laser in any way. Modifying the tool
may result in hazardous laser radiation exposure.
Do not operate the laser around children or allow
children to operate the laser. Serious eye injury
may result.
Do not remove or deface warning labels. If labels are
removed, the user or others may inadvertently expose
themselves to radiation.
Position the laser securely on a level surface. If the
laser falls, damage to the laser or serious injury could result.

Personal Safety

Stay alert, watch what you are doing, and use common
sense when operating the laser. Do not use the laser when
you are tired or under the influence of drugs, alcohol, or
medication. A moment of inattention while operating the
laser may result in serious personal injury.
Do not overreach. Keep proper footing and balance at all
times. Proper footing and balance enables better control of
the tool in unexpected situations.
Use personal protective equipment. Always wear eye
protection. Depending on the work conditions, wearing
protective equipment such as a dust mask, non‑skid
safety shoes, hard hat, and hearing protection will reduce
personal injury.
Tool Use and Care
Do not use the laser if the Power/Transport Lock switch
does not turn the laser on or off. Any tool that cannot
be controlled with the switch is dangerous and must
be repaired.
Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of electric
shock or injury.
Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one laser, may create a risk of injury when used
on another laser.
English
WALT.com.
e
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dcle34022

Tabla de contenido