Descargar
Compartir
Imprimir esta página
EDIFIER TO-U7 Pro Manual
  1. Manuales
  2. Marcas
  3. EDIFIER Manuales
  4. Auriculares
  5. TO-U7 Pro
  6. Manual
EDIFIER TO-U7 Pro Manual

EDIFIER TO-U7 Pro Manual

Ocultar thumbs
1
2
3
4
5
6
7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3

Enlaces rápidos

Descargar este manual
True Wire le ss N oise Ca nce ll at ion In- Ear H eadp ho nes
EN 1. Power ON/OFF
1.Power ON when the case is opened.
2.Power OFF when placed in the case and the case is closed.
Note:
If there is no Bluetooth connection for 10 minutes after power on, the
earbuds will turn off automatically; if there is no Bluetooth connection in
noise cancellation or ambient sound mode, the earbuds will turn off
automatically after 2 hours.
2. Pairing
1.Earbuds placed in the case and keep the case open.
2.Press and hold the button on the case for about 3s. LEDs will be lit
one by one in a clockwise direction and then display circularly.
3.Select "EDIFIER TO-U7 Pro" in your device setting to connect. LEDs
will blink once and then turn off when successfully.
1st Pairing
1.Earbuds placed in the case and keep the case open. LEDs will be lit
one by one in a clockwise direction and then display circularly.
2.Select "EDIFIER TO-U7 Pro" in your device setting to connect. LEDs
will blink once and then turn off when successfully.
Note:
For subsequent use, the earbuds will automatically connect to the device
used last time.
3. Reset
1.Earbuds placed in the case and keep the case open.
2.Press the button on the case 3 times to re-enter left & right connection
and clear pairing records. LEDs will blink twice and then turn off when
successfully.Then, LEDs will be lit one by one in a clockwise direction
and display circularly.
3.Select "EDIFIER TO-U7 Pro" in your device setting to connect. LEDs
will blink once and then turn off when successfully.
4. Charging
5. Controls
Left Touch Panel
Note:
1.Default sound control:both earbuds-noise cancellation & ambient sound
& noise cancellation off; single earbud-noise cancellation off & ambient
sound.
2.Images are for illustrative purposes only and may differ from the
actual product.
3.Download Edifier Connect App for more customizable control settings.
For more information, please visit our website:
@Edifierglobal
Model: EDF280001
Edifier International Limited
P.O. Box 6264
General Post Office
Hong Kong
www.edifier.com
2022 Edifier International Limited. All rights reserved.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time
to time without prior notice.
Products of EDIFIER will be customized for different applications.
Pictures and illustrations shown on this manual may be slightly
different from actual product. If any difference is found, the actual
product prevails.
TO -U7 Pro
Manual
Indicator
Indicator
Indicator
Charging case
1. Please connect the case to power source
with the included Type-C charging cable for
charging.
2. During charging, LEDs will be lit one by one,
and then turn off gradually to the actual
power level after all LEDs are lit; LEDs will
be off after fully charged.
Note:
Please do not charge the earbuds when there
is sweat or other liquids inside the charging
port, which may damage the earbuds.
Input: 5V
x2
x2
x2
x3
www.edifier.com
@Edifier_Global
Button
Button
200mA(Earbuds)
5V
1A(Charging case)
x2
x2
x2
x3
x3
Right Touch Panel
@Edifier_Global
3s

Publicidad

loading

Manuales relacionados para EDIFIER TO-U7 Pro

Resumen de contenidos para EDIFIER TO-U7 Pro

  • Página 1 2.Press and hold the button on the case for about 3s. LEDs will be lit one by one in a clockwise direction and then display circularly. 3.Select "EDIFIER TO-U7 Pro" in your device setting to connect. LEDs will blink once and then turn off when successfully.
  • Página 2 3.Sélectionnez « EDIFIER TO-U7 Pro » dans les paramètres de votre appareil pour vous connecter. Les LED clignotent une fois, puis s'éteignent lorsque la connexion est réussie.

  • Página 3: Controles

    2.Mantenga pulsado el botón de la funda aproximadamente 3s. Los LED se encenderán uno a uno en sentido horario y se mostrarán a continuación circularmente. 3.Seleccione "EDIFIER TO-U7 Pro" en la configuración de su dispositivo para conectar. Los LED parpadearán una vez y se apagarán cuando se conecte con éxito.
  • Página 4 2.Halten Sie zum die Taste am Koffer ca. 3 s gedrückt. Die LEDs leuchten nacheinander im Uhrzeigersinn auf und werden dann kreisförmig angezeigt. 3.Wählen Sie „EDIFIER TO-U7 Pro“ in Ihren Geräteeinstellungen. Die LEDs blinken einmal und erlöschen dann, wenn die Verbindung erfolgreich war.
  • Página 5 2.Premere e tenere premuto il pulsante sulla custodia per 3s. Le spie LED si accendono una alla volta in senso orario, quindi si visualizzano ciclicamente. 3.Selezionare "EDIFIER TO-U7 Pro" nel proprio dispositivo per effettuare la connessione. I LED lampeggiano una volta e poi si spengono quando vengono collegati correttamente.
  • Página 6 - desligar cancelamento de ruído & som ambiente. 2.As imagens são apenas ilustrativas e podem diferir do produto real. 3.Faça o download do App Edifier Connect para obter mais configurações de controle personalizáveis. Para mais informações, por favor, acesse nosso site: www.edifier.com...
  • Página 7 注： オンになてから10分間Bluetooth 接続がない場合、 イヤホンは自動的にオ フになります；ノイズ・キャンセル・モードまたはアンビエント・サウン ド・モードでBluetooth接続がない場合、 イヤホンの電源は2時間後に自動 的にオフなります。 2. ペアリング インジケーター ボタン 1.イヤホンをケースに入れ、 ケースを開いたままにします。 2.ケースのボタンを約3s押してください。 LEDは1つずつ時計回りに点灯し、 その後はサイクル表示します。 3.接続設定するデバイスで「EDIFIER TO-U7 Pro」を選択します。 接続完了 するとLEDは1回点滅して消えます。 初回のペアリング 1.イヤホンをケースに入れ、 ケースを開いたままにします。 LEDは1つず つ時計回りに点灯し、 その後はサイクル表示します。 2.接続設定するデバイスで「EDIFIER TO-U7 Pro」を選択します。 接続完了 するとLEDは1回点滅して消えます。 注： 後の使用のために、 イヤホンは前回使用したデバイスに自動接続します。 3. リセット インジケーター ボタン...