CRX 225 Manual Del Operador página 6

This engine is designed and manufactured for specific applications.
Do not attempt to modify the equipment or use it for any application
for which it was not designed. If you have questions about specific
applications, please contact FNA Group at cservice@fna-group.com
or 1-877-362-4271.
2. Slide the fuel switch to the ON position.
3. Turn the ON/OFF switch to the ON position.
4. Slide the choke lever to the CHOKE position.
5. Move throttle lever to the FAST position (If equipped).
6. Grasp the recoil starter handle and pull it slowly until resistance
is felt. Pull rapidly to avoid kickback.
7. When the engine is running, slide the choke lever back to the
RUN position.