Proposition 65; Symbols On The Machine; Risk Levels; Operation - Rubbermaid 2173520 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3

PROPOSITION 65

WARNING
This product contains a chemical known to the state of
California to cause cancer, birth defects or other reproductive
harm. Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement and other
masonry products;
• Arsenic and chromium from chemically treated lumber.
Your risk of exposure to these chemicals varies depending on
how often you do this type of work. To reduce your exposure
to these chemicals, work in a well-ventilated area, and work
with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
4

SYMBOLS ON THE MACHINE

You may find the below symbols on the machine. Please study
them and learn their definitions. Correct interpretation of these
symbols allow you to operate the tool safely.
Symbol
Explanation
Class II
For indoor use only
Before charging, read the instructions
Fuse
5

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYMBOL
SIGNAL
DANGER
English
MEANING
Indicates an imminently
hazardous situation, which,
if not avoided, will result in
death or serious injury.
SYMBOL
SIGNAL
WARNING
CAUTION
CAUTION
6

OPERATION

6.1

CHARGE PROCEDURE

Before use charge the battery pack fully to make sure that the
battery pack can get the maximum run time. This battery
pack does not have a memory. You can charge it all the time.
1. Connect the plug of charger (2) to an AC power outlet.
2. Put the battery pack (1) into the charger (2).
2
This is a diagnostic charger. The Charger LED Light (3)
illuminates in a specified order to show the current battery
status. They are as follows:
CHARGING PROCEDURE (LED INDICATOR)
BATTERY IS CHARGING
FULLY CHARGED
BATTERY IS TOO WARM (REMOVE FOR
APPROX. 30 MINUTES TO ALLOW TO COOL)
DEFECTIVE BATTERY (REMOVE AND
REPLACE WITH A NEW BATTERY)
3
MEANING
Indicates a potentially
hazardous situation, which,
if not avoided, could result
in death or serious injury.
Indicates a potentially
hazardous situation, which,
if not avoided, may result in
minor or moderate injury.
(Without Safety Alert
Symbol) Indicates a
situation that may result
in property damage.
NOTE
3
1
GREEN
BLINKING
GREEN
RED
RED
BLINKING
EN

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2173896

Tabla de contenido