Deuba CASARIA 993016 Manual De Instrucciones página 4

INSTRUCTIONS
Dear Customer,
You have made a good choice by buying one of our brand-name products. To enjoy the product
for as long as possible and ensure safe handling, please be sure to observe the setup and usage
instructions on the following pages. Our products are regularly inspected to ensure that they meet
the desired high quality standards and, of course, always comply with the stringent requirements
of the European Union. Even the best products can be subject to defects, e.g. due to external
factors. We stand by our quality promise and offer you the best possible service. If a problem does
occur, please contact our trained staff regarding all service matters, complaints and technical
support.
IMPORTANT!
Please read the instructions thoroughly and in their entirety before using the product for the first
time. Keep these instructions for future reference. Should you pass the product on in future, ensure
that you also include these instructions.
CAUTION! POTENTIAL DANGER!
Observe the safety information and setup instructions to avoid the risk of injury or damage to the
product.
RISK OF SUFFOCATION!
Keep small parts and packaging material out of the reach of children!
PRODUCT MODIFICATION
Never make modifications to the product! Modifications will invalidate the warranty and the
product may become unsafe or, in the worst case scenario, dangerous.
GENERAL NOTES
We recommend at least 2 people when assembling larger pieces of furniture.
Please note that screws should first be inserted by hand and tightened only slightly, so that the
damaged and cracks may form. Keep small children away during assembly as there is a risk of
injury!
Failure to carry out regular care and maintenance will significantly reduce the life of your product.
We cannot accept any liability for consequential damage resulting from lack of care and
maintenance.
screws find purchase and loosely connect the constituent parts.
Do not tighten the screws until all elements are connected in the
correct way. Subsequent tightening of the screws can compensate
for minor discrepancies in drill holes or weld points that can be
present in hand-finished products.
Ensure that this product is fully assembled before use. Check that all
screws and bolts are securely tightened; do this regularly.
Do not screw the screws in too tightly as the material may become
4
EN
www.DEUBAXXL.de