Password - VMB Dimmers DS-Pro Manual De Usuario

VMB Española S.A.

7.- PASSWORD

the protection key which locks the access to the diverse menus. This option which is supplied with the
Dimmer, is desactivated and by default the key is
If you have pressed the key
Press the function key
7. Password OFF
7. Password ON
Change (Y)?
Back PSW: ****
Back PSW: ****
New PSW: ****
Back PSW: ****
Incorrect KEY...
7. Password ON
, and the PASSWORD menu will appear. It puts you through
This is the password key display. If you press the function
key , you will have access to the password key
configuración. You will see on display:
The key has been activated by default. You are asked
whether you want to change the present key. For that,
you have to press the function key
activate the present key without modifying it, press any
other key but not
you will see on display:
You are asked for the present key. When typing the
password key, numbers are replaced by stars (****)
so that any non-authorised person can discover it.
DO NOT FORGET THE KEY AND DO NOT WRITE
IT ON THE EQUIPMENT.
If the password key is correctly written, you will see
on display the following message:
In this new window, you will have to write a new key
following the same warning a before.
If the key is not correctly written, you will see the the
following error message: Incorrect KEY and after few
seconds the starting menu will be shown on display.
This message also appears when typing the key
correctly and ending with the processing of this menu.
FUNCTIONNING PRINCIPLES
.
. If you prefer to
.
pag. 25