Battery Connection - Toro 3G-LoRa Tempus Air BS Guia Del Usuario

Toro Tempus Air BS
✔
Prohibited connections
Recommendations of the power supply connection to the electricity network
• Use the power transformer supplied.
• Connect the 230Vac input of the transformer to the electrical network, protecting it with a 2A disconnecting circuit breaker.
• Connect the 24Vdc output of the transformer to the Tempus Air BS as per local installation guidelines with suitable sheathed cable/flexible cord applicable for
the intended application, and water tight conduit and fittings. Sheathed cable/flexible cord shall be Hard Service Cord, or Junior Hard Service Cord.
• Place the transformer and circuit breaker assembly in a Class II electrical box. (supplied by end user. Listed waterproof electrical junction body and conduit in
accordance with local jurisdiction).

1.2 Battery connection

• Connect the battery.
1.3 Reassembly the Tempus Air BS
• Adjust the length of the cable by pulling on it.
• Fit the parts together by applying strong pressure
and lock the 2 parts.
• Tighten the anti-traction.
4
• Set the switch to ON
During the first installation it is
necessary to charge the Tempus Air
BS battery for 24 hours with 230VAC
power before turning it ON.
Upon startup, the Tempus Air BS
LEDs will flash red. Pair the Tempus
Air BS, in the MyToroTempus App via
Bluetooth, to your MyToroTempus
account, following STEP 2. (We remind you that the SIM Card must be activated).
The LEDs will turn green for one hour after pairing to indicate that the product is
operational.
• Adjust the cable.
Close the Tempus Air BS
• Close the lower and upper parts using the locking pictograms