WerkaPro 10084 Manual De Instrucciones Y Mantenimiento página 7

 Check all fasteners and correct tightening of bolts and screws.
 Perform a no-load test run at full lift height.
 If in doubt or if there is a problem, do not use the unit: have it repaired (consult your
dealer).
5. Dismantling and storage
Always place the mower in a dry and well protected area. To disassemble the unit for more
compact storage, follow the assembly instructions in reverse order.
6. Maintenance
 Inspect the screw at the beginning of each use. Have it replaced by an authorised center
as soon as it shows signs of wear (for a list of service centers, consult your dealer)
 Grease the screw occasionally.
 Clean the appliance with a brush and a damp cloth - never use caustic products! Then
dry the unit thoroughly.
IMPORTANT: When replacing worn or damaged parts, only original parts may be used:
consult your dealer.