Sunbeam Products Oster OS-WSMD16S Manual De Instrucciones página 24

adjust the supporting feet (adjustment feet) on the front of the washing machine to
keep the washing machine level.
1
Check the level of the
washing machine visually.
2 Install the bottom cover:
a. The bottom cover is placed between the top of the washing machine box and
the foam. Take it out when unpacking.
b. Place the washing machine gently on the side of the soft object (be careful not
to touch the housing).
c. Insert the bottom cover along the mounting slot on the base until it is seated.
d. Fasten the bottom cover to the base with screws (in the accessory bag).
e. Gently lift the washing machine and let it rest.
3 Connection of the inlet/drain hose
Connection between water inlet and tap (
1)
a. To ensure that there is a sealing pad in the joint of the water inlet and the
installation is smooth.
2
If you have a spirit level, set the
bubble in the spirit level.
Double thread
English-6
water inlet)