Bemma TERRA Instrucciones De Ensamblaje página 4

S T E P 2
I n s t a l l t h e C o u n t e r t o p S i n k . P r o f e s s i o n a l I n s t a l l a t i o n
r e c o m m e n d e d .
1. With your vanity base in place, level and secured to the wall
correctly, and your plumbing routed, it's time to install your counter
and sink.
2. With clean hands to prevent any smudging of top, 2 adults
must carefully unpack the countertop packaging. The sinks come
pre-attached to the counter and do not need any adjustment.
3. Prior to installing the top, apply a small bead of silicone on the top
rail of the wood vanity base.
4. With an adult on either end of the vanity top, carefully lift the top
out of box and place into position on the vanity base, centering the
top onto the unit, checking for the same overhang on each side of
the base.
5. If you have a Backsplash, it can be installed at this time. Important:
Backsplash is very fragile. Assembly should be done with two people.
6. Clean up any silicone residue quickly with mineral spirits and a
microfiber towel. Allow silicone sealant to fully dry for 24 hours.
Ensure to apply the silicone
to the rough edge, and that
the smooth face is facing
the front
1 (833) 66 BEMMA
customercare@bemmadesign.com