INSTALLATION INSTRUCTIONS (Semi-Recessed Sink)
2. Take out the top (B) and backsplash (C)
according to the steps indicated by the
drawings on the right, and place them face
up onto a scratch free surface such as a
foam sheet that came in the packaging.
Note: A t this stage it may be easier to install
the faucet and drain kit (not included) to top (B)
per the manufacturer's instructions, before
moving on to Step 3.
3. Apply stain free silicone caulk (not included) to
the top edge of vanity (A). With the help of
another adult, gently lower top (B) onto the
vanity (A). Wipe away any excess caulk with a
soft cloth, and wait approximately 24 hours for
it to dry.
2
C
B
3
2
A
5
Foam sheet
Remove the top foam sheet
C
Remove the backsplash and place
it on a scratch free surface
Remove the foam sheet
1
B
2