Publicidad
Idiomas disponibles
Idiomas disponibles
5)
6)
During the machine working, machine will stop working when take off the tank,put
tank the water tank to the machine base, machine will continue to work .
Ⅵ .Cleanness & Maintenance
●
Before cleaning, turn the functional knob point to " OFF", take off the plug
1)Transducer
●The water quality in someplace is too hard so that the transducer surface will be easy
to scale formation, The users need to clean transducer with cleaning agent .
●Add little cleaning agent on the transducer surface ( More or less depends on the
scale ), then infuse water into the sink to soak the sink fully for 10-15 min.
●Clean with brush until scale disappear.
●Clean twice with water
☆Don't clean transducer by any metal or stiffness material or scrape it to avoid any
damage
2) Water tank inside
●
Clean water tank inside and water sink twice per week at least when use machine
frequently
●
Use soft cloth wipe it when water tank side has scale
●
There will be some dirt stick to the tank inside wall, which can be cleaned with soft
scour, Clear the scour completely
●
Don't put acid, alkalescency, blencher scour into water tank to avoid damage
3) Water sink inside
●
Take out the water in sink, Clean the scale by brush, then wiped by damp cloth
●
Flush it by water
●
Don't pour water in sink directly when cleaning the water sink inside
●
Don't use acid scour to wash the water sink inside to avoid damage on transducer
(4)Body and water tank outside
●
Wipe it with soft cloth, use soft scour when any dirty
(5) Storage
●
Drain out water in tank and body, clean the dirt, wipe out water and airing the
machine
●
Ensure that no water in the machine and put it to the carton
Publicidad
