Descargar Imprimir esta página

Helvex PIAZZA UPIA-100 Guia De Instalacion página 2

Monomando para lavabo / monomando alto para lavabo

Publicidad

Unscrew the connectors and the nut,
2
remove the washer and the separator.
Desenrosque los conectores y la tuerca,
remueva la rondana y el separador.
empaque
washer
rondana
nut
tuerca
connectors
conectores
To purge supply lines, open and close the angle valves.
5
purgar las líenas de alimentación, abra el suministro de agua y
cierre.
angle valves
válvulas
angulares
hot water
agua caliente
Open the water supply.
/ Abra el suministro de agua.
cold water
agua fría
hot water
agua caliente
Insert the faucet into the sink and check
/
that the gasket is placed.
salida en el lavabo y verifique que se
coloque el empaque.
gasket
gasket
empaque
separator
separador
cold water
agua fría
/ Inserte la
/ Para
Screw the hoses (not included) to the connectors and then to
6
the supply line.
conectores y posteriormente a la línea de alimentación.
hoses (not included)
mangueras (no incluidas)
supply lines
(not included)
líneas de alimentación
(no incluido)
To open the water flow lift the lever and to close push the lever. To
8
adjust the water temperature, turn left for hot and turn right for cold.
Para abrir y cerrar el flujo de agua, levante y baje el maneral. Para
regular la temperatura del agua, gire a la izquierda para caliente y
gire a la derecha para fría.
+ hot
+ caliente
Insert the separator and the washer.
Screw the nut to fix and screw the
connectors.
/ Inserte el separador y la
rondana. Enrosque la tuerca para fijar y
enrosque los conectores.
separator
separador
washer
rondana
nut
tuerca
/ Enrosque las mangueras (no incluidas) a los
connectors
conectores
+ cold
+ fría
open
abrir
Tighten firmly.
Apriete firmemente.
/
2

Publicidad

loading

Este manual también es adecuado para:

Piazza upia-101