Frame Assembly - Omni cubed Slim Slab Saver S3 Serie Manual Del Usuario

INSTRUCTIONS
en
Slim Slab Saver™

Frame Assembly

1. Adjust each rail to the desired length:
a. Loosen both lock knobs.
b. Extend the rail.
c. Tighten both knobs.
2. Adjust each cup position:
a. Loosen the lock knob.
b. Slide the cup assembly to the
desired position.
c. Tighten the knob.
3. Place two or three adjustable rails on
a horizontal surface.
4. Place two cross-brace rails across the
adjustable rails.
8