Thulos TH-CP113 Manual De Instrucciones página 8

MACHINE PARTS.
BATTERY CHARGE.
- Make sure the machine is turned off.
- The machine must be charged immediately when it runs out of charge.
- Never leave the battery without charge as it may break down and not charge again.
- Connect the charging cable, first to the machine and then the Usb to the adapter.
- The adapter must be 5VDC. Normally it can be worth that of your mobile phone.
- The charging time may vary depending on the amperage of the charging adapter.
- The display indicates the percentage of charge.
- When the percentage reaches 100 the charge will be complete.
- Never interrupt charging once plugged in to charge as it shortens battery life.
- If you are going to spend some time without using the machine, you should charge the battery
once a month.
- Do not charge the machine while it is inside the box, as it can get hot when charging.
1. Trimming Blades.
2. Engine rotor.
3. On/Off button.
4. Display.
5. Charging connector (Type-C).
6. Cutting combs.
7. Cleaning brush.
8. Power supply 5VDC by USB.