Service And Warranty; Maintenance And Cleaning; Verwendete Symbole - Dremel 910 Traducción De Las Instrucciones Originales

colours, it is recommended to cut the sticks into
3 cm pieces before inserting into the glue gun.
g.
GG01 = Multipurpose glue, 7 mm
GG02 = Multipurpose glue, 7 mm
GG03 = Wood glue, 7 mm
dry GG04 = Glitter glue, 7 mm
GG05 = Colour glue, 7 mm
GG11 = Multipurpose glue, 11 mm
GG13 = Wood glue, 11 mm
NOTE: Do not use glitter or colour sticks at high
temperature. The drip-control function will not
work properly.
CHANGING GLUE STICKS
• Do not attempt to remove the unused
portion of the glue stick from the tool.
• If you need to switch glue sticks, empty the
melting chamber by squeezing the trigger
t.
and insert new stick.
CHANGING NOZZLES (940)
or
• Before changing nozzles, make sure tool is
cool to the touch, unplugged, and the switch
o
is in the "off" position.
)
• Use a spanner and turn the nozzle from
the housing.
• Mount a new nozzle on the housing.
STAND / KICK STAND
When glue gun is hot, do not lay on its side.
Always use stand.
• Push stand D into "down" position when
temporarily not in use (910, 920, 930).
• Push the stand release button H to release
ns the stand (940).
When re-using or storing, push stand back into
"up" position.

MAINTENANCE AND CLEANING

!
ad
UNAUTHORIZED PERSONNEL MAY
RESULT IN INCORRECT CONNECTION OF
INTERNAL WIRING AND COMPONENTS
WHICH COULD CAUSE SERIOUS
HAZARD.
for
Always keep the tool clean so that it functions
properly and accurately.
g
!
NO USER SERVICEABLE PARTS
INSIDE. PREVENTIVE
MAINTENANCE PERFORMED BY
TO AVOID ACCIDENTS, ALWAYS
DISCONNECT THE TOOL AND/OR
CHARGER FROM THE POWER SUPPLY
BEFORE CLEANING
Ventilation openings and switch levers must be
kept clean and free of foreign matter. Do not
attempt to clean the tool by inserting pointed
objects through an opening.
CERTAIN CLEANING AGENTS AND
!
SOLVENTS DAMAGE PLASTIC
PARTS. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.

SERVICE AND WARRANTY

We recommend that all tool service be
performed by a Dremel Service Centre.
This Dremel product is guaranteed in
accordance with statutory/country-specific
regulations; damage due to normal wear
and tear, overload or improper handling are
excluded from the warranty.
In case of a complaint, send the undismantled
tool and/or charger and proof of purchase to
your dealer.
CONTACT DREMEL
For more information on service and warranty,
the Dremel product range, support and hotline,
go to www.dremel.com.
DISPOSAL
The tool, accessories and packaging should be
sorted for environmental-friendly recycling.
ONLY FOR EC COUNTRIES
According the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment
and its implementation into national right,
power tools that are no longer usable must
be collected separately and disposed of in an
environmentally correct manner.
DE

VERWENDETE SYMBOLE

1
LESEN SIE DIESE ANWEISUNGEN
2
KLASSE-II-AUSFÜHRUNG
5
3