G Operating Instructions
Important information - Quick-
reference guide:
• This quick-reference guide contains the most
important basic information, such as safety
instructions and the steps necessary to operate
the product.
• The full text of the manual is available at the
following internet address:
www.hama.com -> 00176614 ->
Downloads
• Save the manual on your computer for reference
and print it out if possible.
1. Explanation of symbols used on the
product label
Electrical device of safety
class II.
Protection against electric shock
thanks to reinforced or double
insulation of live parts.
The product must only be used with
alternating current.
Non-dimmable.
The lamp is not suitable for use with
a conventional dimmer.
The article may only be connected by
a quali ed electrician who complies
with national regulations and those
of the local energy supply company,
and who has su cient knowledge
regarding installation locations, re
protection and electrical installation
work.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
6
Non-interchangeable
adapter.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to speci c hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• 1 Wi Floodlight Camera
• 1 mounting kit
• 1 quick reference guide
3. Safety instructions
• This product is intended for private, non-
commercial use only.
• Use the product only for the intended purpose.
• Do not drop the product and do not expose it to
any major shocks.
• Do not operate the product outside the power
limits given in the speci cations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Children must not play with the device. Cleaning
and user maintenance must not be carried out by
children without supervision.
• As with all electrical products, this device should
be kept out of the reach of children.
• Dispose of packaging material immediately
in accordance with the locally applicable
regulations.
• The product must only be operated on a supply
network as described on the type plate.
• Before mounting, check that the wall you have
chosen is suitable for the weight to be mounted.
Also make sure that there are no electric, water,
gas or other lines running through the wall at the
mounting site.
• Electrical cables must never become trapped or
twisted between the product and the surface.
• If the product is attached to a metal surface,
it must be connected to an earth lead or the
installation's potential equalising cable.
• Only use the article under moderate climatic
conditions.
• Do not use the product in areas in which
electronic products are not permitted.
• Do not bend or crush the cable.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
quali ed experts.