Product Usage; Water Softener - Kunft KDW5137 WH Manual De Instrucciones

2.2. Product usage

Please read the corresponding content on the instruction's manual
for a detailed operating method.
1. Install the dishwasher
2. Remove the larger residue
on the cutlery
4. Add the detergent

Water Softener

The water softener must be set manually, using the water hardness
dial.
The water softener is designed to remove minerals and salts from
the water, which would have a detrimental or adverse effect on the
appliance's operation.
The more minerals there are, the harder your water is.
The softener should be adjusted according to the water hardness in
your area. Contact your local Water Authority for advice on the water
hardness in your area.
Adjusting the Salt Consumption
This dishwasher is designed to allow for adjusting the amount of salt
consumed based on the hardness of the water used. This is intended
to optimise and customise the salt consumption level.
Inside Inside
3. Load the baskets
5. Select a programme and
running the dishwasher
10
dishwasher
Please follow below steps to adjust salt consumption.
1. Switch on the appliance.
2. Press the Start / Pause button for more than 5 seconds to start the
water softener setup mode within 60 seconds after the appliance
was switched on.
3. Rotate the Programme knob to select the proper setting according
to your local environment. Settings will change in the following
sequence: H1->H2->H3->H4->H5->H6.
4. Press the On / Off button to end the setup mode.
WATER HARDNESS
German French British Mmol / l
º dH º fH º Clarke
0 - 5 0 - 9 0 - 6 0 - 0.94 H1-> Rapid
6 - 11 10 - 20 7 - 14 1.0 - 2.0 H2-> 90 min
12 - 17 21 - 30 15 - 21 2.1 - 3.0 H3-> 90 min Rapid
18 - 22 31 - 40 22 - 28 3.1 - 4.0 H4-> Glass
23 - 34 41 - 60 29 - 42 4.1 - 6.0 H5-> Glass Rapid
35 - 55 61 - 98 43 - 69 6.1 - 9.8 H6-> Glass 90 min
1° dH = 1.25° Clarke=1.78° fH = 0.178 mmol/l. The manufactory
setting is: H3.
Contact your local water authority for information on the hardness of
water supplied.
Please check section 3 "Loading the Salt Into the Softener" of PART I:
Generic Version, if your dishwasher lacks salt.
NOTE:
If your model does not have any water softener, you may skip this
section.
Water Softener
Water hardness varies from place to place. If hard water is used
in the dishwasher, deposits will form on the dishes and utensils.
This appliance is equipped with a special softener that uses a salt
container specifically designed to eliminate lime and minerals from
the water.
EN
KDW5137 WH
KDW5137 SL
Salt
Water softener consumption
level (grams /
cycle)
0
indicator light
9
indicator light
12
indicators light
20
indicator light
30
indicator light
60
indicator light
11