Safety Instructions - Steren CAU-300 Manual De Instrucciones

Before using your new Soldering Station, please read this Before using your new Soldering Station, please read this
instruction manual to prevent any damage. Put it away in a instruction manual to prevent any damage. Put it away in a
safe place for future references. safe place for future references.

SAFETY INSTRUCTIONS

Do not touch the metallic parts while the unit is on
Do not use the unit near to infl ammable materials
Always disconnect the equipment from the electrical current
before cleaning or switch pieces
Clean only with a soft, dry cloth
Do not try to open the equipment, may cause malfunction and
warranty repeal
Do not use or store the equipment near wet places. May cause
malfunction or shock hazard
Do not use the equipment if the power cord is broken
Never submerge the tip in liquid to accelerate the cooling
Do not use fi les to clean the tip
Only indoor use
Unplug the device pulling out from the plug not from the power
cord.
If the power cord has damages, please contact to your nearest
Steren dealer.
INSTRUCTIONS
1.- Connect the soldering station to an AC outlet (120V~ 60Hz).
This device includes a switch to select the desired watts (20W or
40W). Tin the tip with soldering paste when is warm, gradually
the soldering paste starts to melt. Then, you can start to weld the
electronic components.
2.-To keep the equipment in optimal conditions, maintain the tip
free of soldering residues. Clean the tip after the equipment be
totally cold.
SPECIFICATIONS
Input: 120V~ 60Hz 20/40W
El diseño del producto y las especifi caciones pueden El diseño del producto y las especifi caciones pueden
cambiar sin previo aviso. cambiar sin previo aviso.
ENGLISH-2