Intended Use - Hilti NURON VC 140-2-22 Manual Del Usuario

3 Description
3.1 Product overview
3.2

Intended use

The product described is a cordless dust extractor and is designed for the commercial sector, e.g. for use
on construction sites, in hotels, schools, hospitals, factories, stores and offices, and by rental companies. It
is designed for applications in the wet and dry sectors.
Use of the product to clean down persons or animals is not permissible. Underwater use is not permissible.
This product is approved for the Hilti SafeSet application.
The products described here meet the requirements of the OSHA 1926.1153 Regulation, Table 1.
▶ Before beginning work with the product, find out how to operate it correctly and about any hazards
associated with the materials you will be working with and how these materials can be disposed of safely.
▶ Do not use the product for continuous, stationary operation in automatic or semi-automatic systems.
▶ To reduce the risk of injury, use only genuine Hilti accessories and accessory tools.
▶ Use an anti-static suction hose in order to avoid electrostatic effects.
▶ Do not vacuum up objects or materials that could cause injury by piercing through the dust bag (e.g.
pointed or sharp objects).
▶ Do not stand on the product (do not use it as a substitute for a ladder).
▶ Observe the accident prevention regulations applicable in your country.
This product is suitable for the following applications in commercial use:
Vacuuming up small quantities of dust from Hilti diamond grinders, cut-off saws, rotary hammer drills
•
and core drilling machines using dry-cutting core bits.
• Vacuuming up oil and liquid media up to a temperature < 60 °C (140 °F).
• Wet and/or dry cleaning of wall and floor surfaces
With vacuum cleaners it is necessary to make provision for an adequate rate of air exchange (L) in the room
in situations where the expelled air is returned to the room. Comply with national regulations.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
*2330316*
1
2330316
Transport handle
@
Control switch
;
Holder for backpack (optional)
=
Suction head
%
Discharged-air outlet
&
Container cover latch
(
Waste material container
)
Intake fitting (suction hose)
+
Display and control panel
§
Blanking cover for wireless module (optional)
/
Battery compartment
:
Battery release button
∙
Battery status indicator
$
English 5