Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Before using your new Electronic insect killer, please read
Before using your new Emergency button, please read this
this instruction manual to prevent any damage. Put it away
instruction manual to prevent any damage. Put them away in a
in a safe place for future references.
safe place for future references.
• The emergency button is very useful in security systems or alarms. It has
dual connection configuration: normally open, normally closed.
• It can supports up to 24Vcc and 500mA.
• Dual configuration (NC, NO)
• All required tools are included
INSTRUCTIONS
1. Run the alarm system's cables to the location where the emergency button
will be set up.
2. Determine where on the surface to place the
emergency button.
3. Remove the protective cover from the switch and
mark the holes to be made on the surface.
4. Connect the cables to the screw terminals.
• If you want to make a "Normally open" connection, then connect the cable
to the COM (Common) screw and the other end of the cable to the NO
(Normally Open) screw.
In this way, the alarm will activate when the emergency button is
pressed.
• If you wish to create a "Normally closed" connection, then connect the
cable to the COM (Common) screw and the other end of the cable to the
NC (Normally Closed) screw.
This type of connection is recommended for use in electric doors
HIGHLIGHTS
5. Screw the unit on the surface (screws
not included).
Tighten the screws and place the cover
back on.
CARACTERÍSTICAS
Operational voltage: 24V - - - 500mA
Before using your new Electronic insect killer, please read
Product design and specifications are subject to change
this instruction manual to prevent any damage. Put it away
without previous notice.
Product: Emergency button
Part number: ALA-002
Brand: Steren
This Steren product is warranted under normal usage against defects in
workmanship and materials to the original purchaser for one year from the
date of purchase.
1.- This warranty card with all the required information, invoice or
purchase ticket, product box or package, and product, must be
presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free
of charge.
3.- The repairing time will not exceed 30 natural days, from the day the
claim was received.
4.- Steren sell parts, components, consumables and accessories to
customer, as well as warranty service, at any of the addresses mentioned
later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God,
mishandling, leaky batteries, failure to follow enclosed instructions,
improper repair by unauthorized personnel, improper safe keeping,
among others.
a) The consumer can also claim the warranty service in the purchase
establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice
or purchase ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
In case your product fails or have questions, please contact your
nearest dealer. If you are in Mexico, please give a call to our Call
Center. Call Center
01 800 500 9000
WARRANTY
CONDITIONS

Publicidad

loading

Resumen de contenidos para Steren ALA-002

  • Página 1 • Dual configuration (NC, NO) Brand: Steren • All required tools are included WARRANTY This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from the INSTRUCTIONS date of purchase.
  • Página 2 1.- Para hacer efectiva la garantía, presente ésta póliza y el producto, en donde fue adquirido o en Electrónica Steren S.A. de C.V. 2.- Electrónica Steren S.A de C.V. se compromete a reparar el producto en caso 2.- Ubique la posición de colocación del interruptor.