Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Warnings
● Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.Save all warnings and instructions for future
reference.
● Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
● Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
● Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
● Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
● When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
● Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, nonskid safety shoes, hard hat, or hearing protection.
● Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
● Be sure bonnet is snugly installed on pad.
● Keep hands and fingers away from rotating bonnet.
● Before turning the switch to the ON position, be sure the pad is free to revolve harmlessly.
● Inspect the bonnet frequently for wear, dirt or imbedded debris.
● Do not allow the power cord to contact the rotating bonnet as it may become quickly tangled
around it. If this occurs, turn tool OFF and unplug the power cord before attempting to untangle the
cord. If the cord is damaged, have it repaired or replaced at your local tool repair station.
● Never use a damaged or torn bonnet.
● Wear proper clothing, short sleeves, nothing loose or bulky, such as shop coat, etc.
● Do not turn tool on unless the polishing bonnet is against surface being polished.
● Be extremely careful when polishing around sharp or protruding objects on the car body.
● This product is designed as a polisher only. Do not use as a sander.
● Do not use abrasive or rubbing compounds. The abrasive nature of these products can damage
painted surfaces.
Technical Data
● Model:PW120
● Rated Voltage:120V~60Hz(US),230V~50Hz(EU)
● Rated Power:1.1A(120W)
● n0:1500~3800 r/min(US),1500~3600 r/min(EU)
● Pad Size:10"(25cm)
Product Structure
Fig-1
a)
e)
f)
b)
c)
g)
h)
d)
i)
01
Publicidad
