Steam Ironing; Burst Or Vertical Steam Ironing; Dry Ironing - KRHÜNER 43913 Manual De Instrucciones

Fabric
Synthetic
Silk, wool
Cotton, Linen

STEAM IRONING

Place the iron in a vertical position and let the temperature control knob at the mini-
mum/lower heat setting.
Insert the plug into the socket, and then turn the temperature control knob to the "high
heat" marking. The pilot light will come on, indicating that the iron is heating up.
When the pilot light turns off, the set temperature has been reached and the iron is
ready to use.
During ironing, the pilot light on the iron automatically switches on/off as the thermo-
stat maintains the set temperature (you may continue ironing during this process).
Turn the steam control knob to the required position.
Steam is produced as soon as the iron is held horizontally.
SPRAYING
Press the spray button to spray water on clothes, as often as required.
Note: when using the water spray function, ensure that there is enough water in the
water tank. The first time of use you may have to press the spray button several times
in order to start the spraying function.

BURST OR VERTICAL STEAM IRONING

Press the burst of steam button to generate a powerful burst of steam that can pene-
trate the fabrics and smooth the most difficult and tough creases. Wait for 5 few sec-
onds before pressing again.
By pressing the burst of steam button at intervals you can also iron vertically (curtains,
hung garments, etc.)
Note: The burst steam function can only be used at a high temperature. Stop the emis-
sion when the pilot light turns on, then start ironing again when the pilot light turns off.

DRY IRONING

For ironing without steam, follow the instruction in section steam ironing, however, the
steam control turning knob should remain in position "O" (no steam).
Temperature control
•
• •
• • •
Temperature requirement
Low temperature
Medium temperature
High temperature