Publicidad
Idiomas disponibles
Idiomas disponibles
not use the tool near cable, electrical power or
telephone lines. Keep 3m away from all power
lines. (See Fig. E1-E4)
4. Use both hands to grip Pole Saw. Use only
designated grip areas when operating Pole Saw
(See Fig. E5). Use firm grip. Thumbs and fingers
must wrap around Pole Saw handle and pole.
5. Make sure your footing is firm. Keep feet apart.
Divide your weight evenly on both feet.
6. When ready to make a cut, press the Lock-out
Button, then fully press the On/off Switch (See
Fig. E6). This will turn Pole Saw on. Releasing On/
off Switch will turn Pole Saw off. Make sure saw is
running at full speed before starting a cut.
7. When starting a cut, place moving chain
against wood. Hold Pole Saw firmly in place to
avoid possible bouncing or skating (sideways
movement) of saw.
8. Guide Pole Saw using light pressure. Do not force
Pole Saw. The motor will overload and can burn
out. It will do the job better and safer at the rate
for which it was intended.
9. Remove Pole Saw from a cut with saw running
at full speed. Stop Pole Saw by releasing trigger.
Make sure chain has stopped before setting Pole
Saw down.
Cordless Pruning Saw
7
EN
Publicidad
